How to Use the New Project Wizard

Select File | Project | New Project to open the wizard.  The New Project Wizard: Welcome screen displays.

Use the existing emulator connection, or select Add/Edit to create a new emulator connection (USB or TCP/IP).

New Project Wizard: Welcome dialog box.

 

Click the Next button.  The New Project Wizard: Project File screen displays:

 

New Project Wizard: Project File dialog box

File Path Section

Filename.  Enter the name of the project file.  Note:  This field is filled in automatically if a target configuration file is specified in the next section.

Location. Enter the location for the project file, or press the Browse button to navigate to the location.  Note:  This field is filled in automatically if a target configuration file is specified in the next section.

Target Configuration File Section

Target Configuration File.  Enter the name of a target configuration file, or press the Browse button to navigate and select one.

Identify Target. If you're not sure which target configuration file to use, the Identify Target button can be used to help select the best file.  This feature works for most newer processors.  It will also check if there is a newer version of the target configuration file available online.

 

Click the Next button.  The New Project Wizard: Completing screen displays:

New Project Wizard: Completing dialog box

To exit the New Project Wizard and open the new project file, select Finish.  If you wish to create the new project file without automatically loading it, use the checkbox above.