SourcePoint Intel Help

Table of Contents

load

Load a user program into target memory.

Syntax

[[px]] load filename [init] [nocode] [nosym] [AT address | OFFSET expr]

Where:

[px]

specifies an optional viewpoint override. If the viewpoint override is omitted, the current viewpoint is used.

filename

specifies a filename.  See Filenames for details.

init

specifies that registers are to be initialized from values in the loaded file.

nocode

specifies that object code is not loaded into memory during a load operation.

address

specifies the load address for a non-relocatable file.

expr

specifies a relocation offset for a relocatable file.

nosym

specifies that symbols are not loaded into SourcePoint.

Discussion

The following table shows the supported file types.  Use the load command to read an executable file into target memory and/or to load a file's symbols onto the host for symbolic display.

Memory writes are verified depending on the state of the verify control variable.

 

elf

aout

bin

exe

hex

omf86

omf386

PE

textsym

load symbols

x

x

 

 

 

 

x

x

x

load target

x

 

x

x

x

x

x

x

 

relocate address

 

 

x

 

 

 

 

x

 

relocate offset

x

 

 

x

x

 

 

 

x

initialize

*

 

 

 

 

 

x

 

 

*Limited processor initialization

Note: If both nosymbols and nocode options are specified, the file gets loaded as if nocode were specified (symbols only).

Example 1

To load text.elf and initialize processor registers:

Command input:

load c:\test\test.elf init

Example 2

To load text.elf onto processor 1:

Command input:

[p1] load c:\test\test.elf  

Related Topics: