Arium Run-Control Probes for Armโ€‹

About Arium Run-Control Probes for Arm

Armยฎ JTAG debugger products are designed to make the developerโ€™s job easier, and we take great care in developing hardware and software that is easy for the user to set up and configure to speed their development time.ย 

Our tight integration of hardware and software for Arm JTAG debug lends itself to a robust development environment, helping to minimize the challenges associated with debugging code.

Arium LC-500Se Arm JTAG Debugger

Supports the following Arm Processor Cores:

Arm9E, Arm11, Altera Cyclone V SoC, Cortex-M, Cortex-R, Cortex-A, NXP i.MX and TI OMAP.

The Arium LC-500Se is our most popular run-control probe supporting targets with Arm cores. The unit offers reliable run-control and intuitive stepping features. Itโ€™s designed for speed, too, with fast file and image downloads and quick stepping through code. The LC-500Se operates with SourcePoint, ASSET’s flagship C/C++ debugger, on Microsoft Windows and offers debug of boot firmware, device drivers, and application code.

Featuring real-time event management, independent processor control, and CoreSight trace control, the LC-500Se delivers superb advanced debugging benefits via the SourcePoint debugger. The debugger interface is part of the companyโ€™s core technology, developed specifically for SoC design and debug.

Includes power supply, host and target interface cables, and installation manuals. Supports targets with Embedded Trace Buffer (ETB), CoreSightโ„ข, 20MHz JTAG rate.

Arium LC-500Se Hardware
Arium LC-500Se Features
  • Works in real-time (maximum device frequencies)
  • Non-intrusive debug with high-speed run-control
  • Embedded Trace Buffer support (ETB, ETF and ETR)
  • Serial Wire Debug (SWD)
  • Small, lightweight form-factor
  • Low cost probe
  • USB 2.0 & 10/100/GE connectivity
  • High-speed download
  • Integrated flash programming
  • In-line assembly
  • Semi-hosting
  • Self-diagnostic test suite
  • Robust C-like scripting language
  • Comprehensive warranty
  • Extended service agreement available

Arium LX-1000e for ARM Trace Port Analyzer with Deep Trace

The Arium LX-1000e for Arm is a modular trace port analyzer design supporting both Arm serial and parallel trace access. The LX-PAR and LX-SER support Arm devices with parallel ETM and serial trace (both Marvell SETM and Arm HSSTP) respectively.

The LX-1000e for Arm comes standard with 2 GBytes of trace memory. The trace capture engine traces instructions/data at rates up to 680MHz and is wide enough to support up to 6 lanes of serial trace packets up to 6.25 GTPS. The LX-1000e for Arm represents the fastest trace port analyzer on the market, giving ASSET customers a valuable investment to support future devices. Communication interfaces include USB 1.1/2.0 and 10/100/GE Ethernet. Trigger in/out is also standard.

ASSET tracks Arm roadmaps supporting the latest processor offerings.

Arium Run-Control Probes for ARM
Arium LX-1000e for Arm Debug Support
  • Auto target acquisition – navigation of the SoC complex including the CoreSight structure
  • Non-intrusive debug
  • Real-time operation
  • Source codeย debug
  • Multi-core & hetero-core
  • Multiple ETMs
  • Trace data mining
  • Serial wire debug (SWD)
  • All CoreSight components supported
  • Trace statistics
ARM Toolchains Supported
  • ARM DS-5
  • ARM Development Suite
  • ARM RealViewยฎ Developer Suite
  • Green Hillsยฎ C/C++
  • GNU C/C++
  • IAR Embedded Workbenchยฎ
Other Features Supported
  • High-speed downloads
  • Independent core control
  • Advanced breakpoints
  • Flash programming
  • Windows & Linux Host