ScanWorks Boundary-Scan Test Archives | Page 3 of 4

ASSET integrates ScanWorks with Teradyne's PXI Express instruments

Monday, September 10, 2012

Richardson, TX, and North Reading, MA – ASSET® InterTech (www.asset-intertech.com), the leading supplier of tools for embedded instrumentation, and Teradyne (www.teradyne.com), the leading supplier of automatic test equipment (ATE), have extended the integration of the JTAG and boundary-scan test capabilities of ASSET’s ScanWorks® platform for embedded instruments into Teradyne’s…

ASSET's two new ScanWorks controller kits tap into high-speed PCI Express bus

Thursday, May 17, 2012

New PCIe-1000 and PCIe-410 are platform controllers supporting ScanWorks® validation, test and debug tools. Richardson, TX – Two new controller kits for the ScanWorks® platform for embedded instruments from ASSET® InterTech (www.asset-intertech.com) can accelerate test throughput by plugging into the high-speed PCI Express® (PCIe) bus in the personal computer…

Four products within the ASSET ScanWorks platform for embedded instruments are named Best in Test finalists

Tuesday, November 15, 2011

Richardson, TX (Nov. 15, 2011) – Four new products for ASSET® InterTech's ScanWorks® platform for embedded instruments have been named finalists by Test & Measurement World magazine for its 2012 Best in Test awards. ASSET (www.asset-intertech.com) is the leading supplier of tools for embedded instrumentation. "It always a tremendous…

ASSET's new Ethernet controller for ScanWorks tests four circuit boards at once

Tuesday, November 1, 2011

Richardson, TX – The new Remote Instrumentation Controller 4000 (RIC-4000) for ASSET®’s ScanWorks® platform for embedded instruments can connect over an Ethernet network and apply boundary scan (JTAG) tests on as many as four circuit boards at once. The units under test (UUT) and ScanWorks could be in the…

ASSET integrates ScanWorks with Teradyne Di-Series instruments for robust boundary-scan test

Tuesday, September 13, 2011

Teradyne and ASSET collaborate to bring boundary-scan board test and device programming to large scale military/aerospace testers. Richardson, TX, and North Reading, MA – ASSET® InterTech (www.asset-intertech.com), the leading supplier of tools for embedded instrumentation, and Teradyne (www.teradyne.com), the leading supplier of automatic test equipment (ATE), have collaborated to…

ASSET's new modeling methodology extends non-intrusive JTAG/boundary-scan test coverage

Thursday, September 8, 2011

Richardson, TX& – A new model-based test methodology for ASSET® InterTech’s ScanWorks® platform for embedded instruments extends non-intrusive boundary-scan (JTAG) test coverage to devices that previously could not be tested or programmed with boundary scan. ASSET is the leading supplier of tools for embedded instrumentation. With the new modeling…

Frost & Sullivan recognizes ASSET for its competitive strategy innovation for ScanWorks platform

Tuesday, November 30, 2010

Richardson, TX – The ScanWorks® platform for embedded instruments from ASSET® InterTech has received a 2010 Global Competitive Strategy Innovation of the Year Award from Frost & Sullivan, a global research and consulting firm. ASSET (www.asset-intertech.com) is the leading supplier of open tools for embedded instrumentation. Every year Frost…

ASSET enhances boundary-scan test capabilities on ScanWorks Platform for Embedded Instruments

Tuesday, August 31, 2010

Richardson, TX – ASSET® InterTech (www.asset-intertech.com), the leading supplier of open tools for embedded instrumentation, has enhanced the boundary-scan test capabilities of its ScanWorks® platform for embedded instruments by adding several powerful and automated test development and debugging features that accelerate the generation of boundary-scan tests. The ScanWorks boundary-scan…

ASSET and IPextreme collaborate to enable ScanWorks as an IEEE 1149.7 test solution

Wednesday, July 14, 2010

Richardson, TX – ASSET® InterTech, Inc., the leading supplier of open tools for embedded Instrumentation, will integrate test adapter intellectual property (IP) from IPextreme into its ScanWorks® platform for embedded instruments to enable chip and circuit board tests under the new IEEE 1149.7 reduced-pin boundary scan standard. “IPextreme leads…

ScanWorks platform for embedded instruments named finalist for EDN's Innovation Award.

Wednesday, February 24, 2010

Richardson, TX – The ScanWorks® platform for embedded instruments from ASSET® InterTech (www.asset-intertech.com), the leading supplier of open tools for embedded instrumentation, has been named a finalist in EDN magazine’s annual Innovation Awards program. Glenn Woppman, ASSET’s CEO and president, was named a finalist for Innovator of the Year…

ScanWorks Boundary-Scan Test