ASSET's ScanWorks is first development tool for the emerging IJTAG embedded instrumentation standard

Richardson, TX – The ASSET® ScanWorks® platform for embedded instruments has the industry’s first toolkit to automate the development of validation and test routines based on the soon-to-be ratified Internal JTAG (IEEE P1687 IJTAG) standard. ASSET® InterTech ( is the leading supplier of open tools for embedded instrumentation. To gain advantage in the marketplace, the beta version of the ScanWorks IJTAG toolkit for developers has already been deployed by two equipment manufacturers and Flextronics, one of the leading electronic manufacturing services (EMS) firms in the world.

According to Al Crouch, co-chairman of the IEEE IJTAG working group and a chief technologist at ASSET, ratification of the IJTAG standard is expected during the second half of 2011.

The IJTAG standard specifies an access architecture and protocol for instruments that are embedded into semiconductor chips. In addition, it defines how these embedded instruments can be managed, accessed and automated, and their output analyzed. ScanWorks IJTAG provides tools that can read IJTAG’s two languages, Instrument Connectivity Language (ICL) and Procedural Description Language (PDL), and exercise embedded IJTAG instruments. ICL defines the connections among embedded instruments in chips and on circuit boards while PDL is an extension of the popular Tcl (Tool command language) for programming validation, test and debug vectors to be executed by IJTAG instruments.

“Our early users have provided us with valuable insight into the functionality that chip and circuit board designers need to take full advantage of IJTAG’s many integration and product life-cycle benefits. Certainly the rapid adoption of any standard depends upon the support it receives from firms across the industry,” said Scott Hack, ASSET’s product manager for ScanWorks IJTAG tools. “We’re seeing this take place now and we expect our toolkit to accelerate the adoption process even further.”

The IJTAG standard will enable a new generation of embedded validation, test and debug methods for chips, circuit boards and systems. For the first time, validation and test routines will be portable. The routines or vectors based on IJTAG will hold tremendous value for manufacturers because they will migrate along with the instruments in the chips and be re-used during every stage in the integration and product life cycle. Starting with core intellectual property (IP) and chip development, a device’s IJTAG capabilities will move with it into circuit board assembly and eventually into system integration, field deployment and repair. Before the IJTAG standard, separate and unrelated validation routines and test vectors were developed at each stage in a system’s life cycle, compounding unnecessarily the cost of finished products. Now manufacturers can pass along reduced costs to users and achieve higher quality and greater reliability in their products because of the more thorough validation and test methods made possible by IJTAG.

“Embedded instruments have been placed in chips for some time now; we’re just now getting around to capitalizing on them by standardizing how we access and re-use them,” Hack explained. “For example, certain built-in self test (BIST) capabilities have been in chips for years, but they were never readily accessible or easy to use for system-on-a-chip (SoC), circuit board and system developers. Now they are because of tools like ScanWorks IJTAG.”

ScanWorks® – Platform for Embedded Instruments

ASSET, through its ScanWorks platform, is applying the experience it has gained from two decades as a leading supplier of IEEE 1149.1 boundary-scan (JTAG) test tools to the development of open embedded instrumentation tools. The boundary-scan infrastructure that is embedded into chips and circuit boards is one of several technologies which can form the basis for an embedded instrumentation toolset. In recent years, ASSET has significantly enhanced ScanWorks beyond boundary-scan test with the addition of other embedded instrumentation technologies, including processor-controlled test (PCT) and tools for Intel® IBIST (Interconnect Built-In Self Test), an embedded instrumentation technology that Intel® and other companies are embedding into next-generation chips and chipsets.

About ASSET InterTech

ASSET InterTech is the leading supplier of open tools for embedded instrumentation for design validation, test and debug. The ScanWorks platform provides automation, access and analysis tools in one environment. Users can quickly and easily validate and test semiconductors, circuit boards or entire systems during every phase of a product’s life, including design, manufacturing/repair and field maintenance. ASSET InterTech is located at 2201 North Central Expressway, Suite 105, Richardson, TX 75080.

For product information, call 888-694-6250, fax 972-437-2826, e-mail or visit

Trademarks: ASSET, the ASSET logo and ScanWorks are registered trademarks of ASSET InterTech, Inc. Intel, Intel Xeon, Intel Itanium and the Intel logo are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries. All other trade and service marks are the properties of their respective owners.