-- (c) Copyright 2008 - 2009 Xilinx, Inc. All rights reserved. -- -- This file contains confidential and proprietary information -- of Xilinx, Inc. and is protected under U.S. and -- international copyright and other intellectual property -- laws. -- -- DISCLAIMER -- This disclaimer is not a license and does not grant any -- rights to the materials distributed herewith. Except as -- otherwise provided in a valid license issued to you by -- Xilinx, and to the maximum extent permitted by applicable -- law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND -- WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES -- AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING -- BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON- -- INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and -- (2) Xilinx shall not be liable (whether in contract or tort, -- including negligence, or under any other theory of -- liability) for any loss or damage of any kind or nature -- releated to, arising under or in connection with these -- materials, including for any direct, or any indirect, -- special, incidental, or consequential loss or damage -- (including loss of data, profits, goodwill, or any type of -- loss or damage suffered as a result of any action brought -- by a third party) even if such damage or loss was -- reasonably foreseeable or Xilinx had been advised of the -- possibility of the same. -- -- CRITICAL APPLICATIONS -- Xilinx products are not designed or intended to be fail- -- safe, or for use in any application requiring fail-safe -- performance, such as life-support or safety devices or -- systems, Class III medical devices, nuclear facilities, -- applications related to the deployment of airbags, or any -- other applications that could lead to death, personal -- injury, or severe property or environmental damage -- (individually and collectively, "Critical -- Applications"). Customer assumes the sole risk and -- liability of any use of Xilinx products in Critical -- Applications, subject only to applicable laws and -- regulations governing limitiations on product liability. -- -- THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS -- PART OF THIS FILE AT ALL TIMES. -- -- -- BSDL file for device XC6SLX9, package FTG256 -- Generated by bsdlnet Version 1.5 ------------------------------------------------------------------------ -- Modification History -- | Generated on 02/10/09 -- | CR # N/A -- | Details - Initial Release with HSWAPEN a compliance enable ------------------------------------------------------------------------ -- | Generated on 03/30/09 -- | CR # N/A -- | Details - Added "g" to pkg names and swapped pins on 45tfgg484. ------------------------------------------------------------------------ -- | Generated on 05/22/09 -- | CR # N/A -- | Details - Removed HSWAPEN as a compliance enable. ------------------------------------------------------------------------ -- | Generated on 06/26/09 -- | CR # N/A -- | Details - Added EFUSE instructions. ------------------------------------------------------------------------ -- | Generated on 07/23/09 -- | CR # N/A -- | Details - Modified as per Jtag Tech, removed ISC_ENABLE/PROGRAM/ -- | NOOP/DISABLE from Private, changed ISC_PROGRAM_KEY -- | instruction width from 8 bits to 4 bits. ------------------------------------------------------------------------ -- | Generated on 08/10/09 -- | CR # 528895/527734/523341 -- | Details - Changed TCK from 33MHz to 25MHz, removed 1149.6 reference, -- | updated Done, M0, M1, Init to have disrslt be PULL1. ------------------------------------------------------------------------ -- | Generated on 06/03/10 -- | CR # 561777 -- | Details - Changed ISC_DNA opcode from 010111 to 110000 and removed -- | ISC_FUSE_READ. ------------------------------------------------------------------------ -- -- For technical support, http://support.xilinx.com -> enter text 'bsdl' -- in the text search box at the left of the page. If none of -- these records resolve your problem you should open a web support case -- or contact our technical support at: -- -- North America 1-800-255-7778 hotline@xilinx.com -- United Kingdom +44 870 7350 610 eurosupport@xilinx.com -- France (33) 1 3463 0100 eurosupport@xilinx.com -- Germany (49) 89 991 54930 eurosupport@xilinx.com -- Japan (81) 3-3297-9163 jhotline@xilinx.com -- -- This BSDL file reflects the pre-configuration JTAG behavior. To reflect -- the post-configuration JTAG behavior (if any), edit this file as described -- below. Many of these changes are demonstrated by commented-out template -- lines preceeding the lines they would replace: -- -- 1. Enable USER instructions as appropriate (see below). -- 2. Set disable result of all pads as configured. -- 3. Set safe state of boundary cells as necessary. -- 4. Rename entity if necessary to avoid name collisions. -- 5. Modify USERCODE value in USERCODE_REGISTER declaration. -- -- To prevent losing the current configuration, the boundary scan -- test vectors should keep the PROGRAM_B pin high. -- -- PROGRAM_B can only be captured, not updated. The value -- at the pin is always used by the device. -- -- All IOBs prior to configuration, and unused and output-only IOBs following -- configuration, will sense their pad values during boundary-scan with an CMOS -- input buffer. In order to properly capture a logic high value at one -- of these IOBs into its input boundary scan cell, please refer to the -- datasheet and user guide for proper input levels. -- -- For post-configuration boundary scan only: If an IOB is configured to use -- an input standard that uses VREF pins, then the boundary scan test vectors -- must keep the used VREF pins 3-stated. -- ---------------------------------- -- BSDL File for P1149.1 Standard. ---------------------------------- -- ---------------------------------------------------------------------- -- This BSDL file has been checked and verified by JTAG Technologies B.V. -- on 2009-11-23, for syntactical and semantic compliance with -- IEEE standard 1149.1 -- using bsdl32.dll 1.6.0.5 - 20090604 Win32 -- copyright (c) 2009 JTAG Technologies B.V., All rights reserved -- ---------------------------------------------------------------------- entity XC6SLX9_FTG256 is -- Generic Parameter generic (PHYSICAL_PIN_MAP : string := "FTG256" ); -- Logical Port Description port ( CMPCS_B: in bit; -- CMPCS_B_2 DONE: inout bit; -- DONE_2 GND: linkage bit_vector (1 to 26); HSWAPEN: in bit; -- PAD1 IO_A10: inout bit; -- PAD24 IO_A11: inout bit; -- PAD32 IO_A12: inout bit; -- PAD36 IO_A13: inout bit; -- PAD38 IO_A14: inout bit; -- PAD42 IO_A2: inout bit; -- PAD192 IO_A3: inout bit; -- PAD200 IO_A4: inout bit; -- PAD2 IO_A5: inout bit; -- PAD4 IO_A6: inout bit; -- PAD8 IO_A7: inout bit; -- PAD12 IO_A8: inout bit; -- PAD20 IO_A9: inout bit; -- PAD22 IO_B1: inout bit; -- PAD188 IO_B10: inout bit; -- PAD23 IO_B12: inout bit; -- PAD35 IO_B14: inout bit; -- PAD41 IO_B15: inout bit; -- PAD47 IO_B16: inout bit; -- PAD48 IO_B2: inout bit; -- PAD191 IO_B3: inout bit; -- PAD199 IO_B5: inout bit; -- PAD3 IO_B6: inout bit; -- PAD7 IO_B8: inout bit; -- PAD19 IO_C1: inout bit; -- PAD187 IO_C10: inout bit; -- PAD28 IO_C11: inout bit; -- PAD31 IO_C13: inout bit; -- PAD37 IO_C15: inout bit; -- PAD55 IO_C16: inout bit; -- PAD56 IO_C2: inout bit; -- PAD184 IO_C3: inout bit; -- PAD183 IO_C5: inout bit; -- PAD6 IO_C6: inout bit; -- PAD14 IO_C7: inout bit; -- PAD11 IO_C8: inout bit; -- PAD30 IO_C9: inout bit; -- PAD21 IO_D1: inout bit; -- PAD186 IO_D11: inout bit; -- PAD43 IO_D12: inout bit; -- PAD44 IO_D14: inout bit; -- PAD51 IO_D16: inout bit; -- PAD52 IO_D3: inout bit; -- PAD185 IO_D5: inout bit; -- PAD5 IO_D6: inout bit; -- PAD13 IO_D8: inout bit; -- PAD29 IO_D9: inout bit; -- PAD34 IO_E1: inout bit; -- PAD180 IO_E10: inout bit; -- PAD27 IO_E11: inout bit; -- PAD40 IO_E12: inout bit; -- PAD46 IO_E13: inout bit; -- PAD45 IO_E15: inout bit; -- PAD57 IO_E16: inout bit; -- PAD58 IO_E2: inout bit; -- PAD179 IO_E3: inout bit; -- PAD196 IO_E4: inout bit; -- PAD195 IO_E6: inout bit; -- PAD10 IO_E7: inout bit; -- PAD25 IO_E8: inout bit; -- PAD26 IO_F1: inout bit; -- PAD170 IO_F10: inout bit; -- PAD39 IO_F12: inout bit; -- PAD49 IO_F13: inout bit; -- PAD53 IO_F14: inout bit; -- PAD54 IO_F15: inout bit; -- PAD59 IO_F16: inout bit; -- PAD60 IO_F2: inout bit; -- PAD169 IO_F3: inout bit; -- PAD194 IO_F4: inout bit; -- PAD193 IO_F5: inout bit; -- PAD198 IO_F6: inout bit; -- PAD197 IO_F7: inout bit; -- PAD9 IO_F9: inout bit; -- PAD33 IO_G1: inout bit; -- PAD168 IO_G11: inout bit; -- PAD50 IO_G12: inout bit; -- PAD65 IO_G14: inout bit; -- PAD61 IO_G16: inout bit; -- PAD62 IO_G3: inout bit; -- PAD167 IO_G5: inout bit; -- PAD190 IO_G6: inout bit; -- PAD189 IO_H1: inout bit; -- PAD166 IO_H11: inout bit; -- PAD66 IO_H13: inout bit; -- PAD67 IO_H14: inout bit; -- PAD68 IO_H15: inout bit; -- PAD63 IO_H16: inout bit; -- PAD64 IO_H2: inout bit; -- PAD165 IO_H3: inout bit; -- PAD176 IO_H4: inout bit; -- PAD175 IO_H5: inout bit; -- PAD174 IO_J1: inout bit; -- PAD164 IO_J11: inout bit; -- PAD69 IO_J12: inout bit; -- PAD70 IO_J13: inout bit; -- PAD71 IO_J14: inout bit; -- PAD75 IO_J16: inout bit; -- PAD76 IO_J3: inout bit; -- PAD163 IO_J4: inout bit; -- PAD172 IO_J6: inout bit; -- PAD173 IO_K1: inout bit; -- PAD162 IO_K11: inout bit; -- PAD74 IO_K12: inout bit; -- PAD73 IO_K14: inout bit; -- PAD72 IO_K15: inout bit; -- PAD77 IO_K16: inout bit; -- PAD78 IO_K2: inout bit; -- PAD161 IO_K3: inout bit; -- PAD171 IO_K5: inout bit; -- PAD181 IO_K6: inout bit; -- PAD182 IO_L1: inout bit; -- PAD160 IO_L10: inout bit; -- PAD115 IO_L12: inout bit; -- PAD95 IO_L13: inout bit; -- PAD96 IO_L14: inout bit; -- PAD83 IO_L16: inout bit; -- PAD84 IO_L3: inout bit; -- PAD159 IO_L4: inout bit; -- PAD177 IO_L5: inout bit; -- PAD178 IO_L7: inout bit; -- PAD138 IO_L8: inout bit; -- PAD137 IO_M1: inout bit; -- PAD158 IO_M10: inout bit; -- PAD116 IO_M11: inout bit; -- PAD104 IO_M12: inout bit; -- PAD103 IO_M13: inout bit; -- PAD99 IO_M14: inout bit; -- PAD100 IO_M15: inout bit; -- PAD81 IO_M16: inout bit; -- PAD82 IO_M2: inout bit; -- PAD157 IO_M3: inout bit; -- PAD146 IO_M4: inout bit; -- PAD145 IO_M5: inout bit; -- PAD147 IO_M6: inout bit; -- PAD141 IO_M7: inout bit; -- PAD122 IO_M9: inout bit; -- PAD117 IO_N1: inout bit; -- PAD156 IO_N11: inout bit; -- PAD109 IO_N12: inout bit; -- PAD107 IO_N14: inout bit; -- PAD79 IO_N16: inout bit; -- PAD80 IO_N3: inout bit; -- PAD155 IO_N4: inout bit; -- PAD148 IO_N5: inout bit; -- PAD135 IO_N6: inout bit; -- PAD142 IO_N8: inout bit; -- PAD118 IO_N9: inout bit; -- PAD111 IO_P1: inout bit; -- PAD154 IO_P10: inout bit; -- PAD105 IO_P11: inout bit; -- PAD110 IO_P12: inout bit; -- PAD108 IO_P15: inout bit; -- PAD85 IO_P16: inout bit; -- PAD86 IO_P2: inout bit; -- PAD153 IO_P4: inout bit; -- PAD139 IO_P5: inout bit; -- PAD136 IO_P6: inout bit; -- PAD131 IO_P7: inout bit; -- PAD121 IO_P8: inout bit; -- PAD119 IO_P9: inout bit; -- PAD112 IO_R1: inout bit; -- PAD152 IO_R11: inout bit; -- PAD101 IO_R12: inout bit; -- PAD93 IO_R14: inout bit; -- PAD89 IO_R15: inout bit; -- PAD87 IO_R16: inout bit; -- PAD88 IO_R2: inout bit; -- PAD151 IO_R3: inout bit; -- PAD143 IO_R5: inout bit; -- PAD133 IO_R7: inout bit; -- PAD123 IO_R9: inout bit; -- PAD113 IO_T10: inout bit; -- PAD106 IO_T11: inout bit; -- PAD102 IO_T12: inout bit; -- PAD94 IO_T13: inout bit; -- PAD92 IO_T14: inout bit; -- PAD91 IO_T15: inout bit; -- PAD90 IO_T3: inout bit; -- PAD144 IO_T4: inout bit; -- PAD140 IO_T5: inout bit; -- PAD134 IO_T6: inout bit; -- PAD132 IO_T7: inout bit; -- PAD124 IO_T8: inout bit; -- PAD120 IO_T9: inout bit; -- PAD114 PROGRAM_B: in bit; -- PROGRAM_B_2 SUSPEND: in bit; TCK: in bit; TDI: in bit; TDO: out bit; TMS: in bit; VCCAUX: linkage bit_vector (1 to 8); VCCINT: linkage bit_vector (1 to 8); VCCO_0: linkage bit_vector (1 to 5); VCCO_1: linkage bit_vector (1 to 6); VCCO_2: linkage bit_vector (1 to 4); VCCO_3: linkage bit_vector (1 to 5) ); --end port list -- Use Statements use STD_1149_1_2001.all; -- Component Conformance Statement(s) attribute COMPONENT_CONFORMANCE of XC6SLX9_FTG256 : entity is "STD_1149_1_2001"; -- Device Package Pin Mappings attribute PIN_MAP of XC6SLX9_FTG256 : entity is PHYSICAL_PIN_MAP; constant FTG256: PIN_MAP_STRING:= "CMPCS_B:L11," & "DONE:P13," & "GND:(A1,A16,B7,B11,D4,D13,E9,G2,G8,G15," & "H7,H9,H12,J5,J8,K7,K9,L2,L15,M8," & "N13,P3,R6,R10,T1,T16)," & "HSWAPEN:C4," & "IO_A10:A10," & "IO_A11:A11," & "IO_A12:A12," & "IO_A13:A13," & "IO_A14:A14," & "IO_A2:A2," & "IO_A3:A3," & "IO_A4:A4," & "IO_A5:A5," & "IO_A6:A6," & "IO_A7:A7," & "IO_A8:A8," & "IO_A9:A9," & "IO_B1:B1," & "IO_B10:B10," & "IO_B12:B12," & "IO_B14:B14," & "IO_B15:B15," & "IO_B16:B16," & "IO_B2:B2," & "IO_B3:B3," & "IO_B5:B5," & "IO_B6:B6," & "IO_B8:B8," & "IO_C1:C1," & "IO_C10:C10," & "IO_C11:C11," & "IO_C13:C13," & "IO_C15:C15," & "IO_C16:C16," & "IO_C2:C2," & "IO_C3:C3," & "IO_C5:C5," & "IO_C6:C6," & "IO_C7:C7," & "IO_C8:C8," & "IO_C9:C9," & "IO_D1:D1," & "IO_D11:D11," & "IO_D12:D12," & "IO_D14:D14," & "IO_D16:D16," & "IO_D3:D3," & "IO_D5:D5," & "IO_D6:D6," & "IO_D8:D8," & "IO_D9:D9," & "IO_E1:E1," & "IO_E10:E10," & "IO_E11:E11," & "IO_E12:E12," & "IO_E13:E13," & "IO_E15:E15," & "IO_E16:E16," & "IO_E2:E2," & "IO_E3:E3," & "IO_E4:E4," & "IO_E6:E6," & "IO_E7:E7," & "IO_E8:E8," & "IO_F1:F1," & "IO_F10:F10," & "IO_F12:F12," & "IO_F13:F13," & "IO_F14:F14," & "IO_F15:F15," & "IO_F16:F16," & "IO_F2:F2," & "IO_F3:F3," & "IO_F4:F4," & "IO_F5:F5," & "IO_F6:F6," & "IO_F7:F7," & "IO_F9:F9," & "IO_G1:G1," & "IO_G11:G11," & "IO_G12:G12," & "IO_G14:G14," & "IO_G16:G16," & "IO_G3:G3," & "IO_G5:G5," & "IO_G6:G6," & "IO_H1:H1," & "IO_H11:H11," & "IO_H13:H13," & "IO_H14:H14," & "IO_H15:H15," & "IO_H16:H16," & "IO_H2:H2," & "IO_H3:H3," & "IO_H4:H4," & "IO_H5:H5," & "IO_J1:J1," & "IO_J11:J11," & "IO_J12:J12," & "IO_J13:J13," & "IO_J14:J14," & "IO_J16:J16," & "IO_J3:J3," & "IO_J4:J4," & "IO_J6:J6," & "IO_K1:K1," & "IO_K11:K11," & "IO_K12:K12," & "IO_K14:K14," & "IO_K15:K15," & "IO_K16:K16," & "IO_K2:K2," & "IO_K3:K3," & "IO_K5:K5," & "IO_K6:K6," & "IO_L1:L1," & "IO_L10:L10," & "IO_L12:L12," & "IO_L13:L13," & "IO_L14:L14," & "IO_L16:L16," & "IO_L3:L3," & "IO_L4:L4," & "IO_L5:L5," & "IO_L7:L7," & "IO_L8:L8," & "IO_M1:M1," & "IO_M10:M10," & "IO_M11:M11," & "IO_M12:M12," & "IO_M13:M13," & "IO_M14:M14," & "IO_M15:M15," & "IO_M16:M16," & "IO_M2:M2," & "IO_M3:M3," & "IO_M4:M4," & "IO_M5:M5," & "IO_M6:M6," & "IO_M7:M7," & "IO_M9:M9," & "IO_N1:N1," & "IO_N11:N11," & "IO_N12:N12," & "IO_N14:N14," & "IO_N16:N16," & "IO_N3:N3," & "IO_N4:N4," & "IO_N5:N5," & "IO_N6:N6," & "IO_N8:N8," & "IO_N9:N9," & "IO_P1:P1," & "IO_P10:P10," & "IO_P11:P11," & "IO_P12:P12," & "IO_P15:P15," & "IO_P16:P16," & "IO_P2:P2," & "IO_P4:P4," & "IO_P5:P5," & "IO_P6:P6," & "IO_P7:P7," & "IO_P8:P8," & "IO_P9:P9," & "IO_R1:R1," & "IO_R11:R11," & "IO_R12:R12," & "IO_R14:R14," & "IO_R15:R15," & "IO_R16:R16," & "IO_R2:R2," & "IO_R3:R3," & "IO_R5:R5," & "IO_R7:R7," & "IO_R9:R9," & "IO_T10:T10," & "IO_T11:T11," & "IO_T12:T12," & "IO_T13:T13," & "IO_T14:T14," & "IO_T15:T15," & "IO_T3:T3," & "IO_T4:T4," & "IO_T5:T5," & "IO_T6:T6," & "IO_T7:T7," & "IO_T8:T8," & "IO_T9:T9," & "PROGRAM_B:T2," & "SUSPEND:P14," & "TCK:C14," & "TDI:C12," & "TDO:E14," & "TMS:A15," & "VCCAUX:(E5,F8,F11,G10,H6,J10,L6,L9)," & "VCCINT:(G7,G9,H8,H10,J7,J9,K8,K10)," & "VCCO_0:(B4,B9,B13,D7,D10)," & "VCCO_1:(D15,G13,J15,K13,N15,R13)," & "VCCO_2:(N7,N10,R4,R8)," & "VCCO_3:(D2,G4,J2,K4,N2)"; -- Scan Port Identification attribute TAP_SCAN_IN of TDI : signal is true; attribute TAP_SCAN_MODE of TMS : signal is true; attribute TAP_SCAN_OUT of TDO : signal is true; attribute TAP_SCAN_CLOCK of TCK : signal is (25.0e6, BOTH); -- Compliance-Enable Description attribute COMPLIANCE_PATTERNS of XC6SLX9_FTG256 : entity is "(PROGRAM_B) (1)"; -- Instruction Register Description attribute INSTRUCTION_LENGTH of XC6SLX9_FTG256 : entity is 6; attribute INSTRUCTION_OPCODE of XC6SLX9_FTG256 : entity is "EXTEST (001111)," & "SAMPLE (000001)," & "PRELOAD (000001)," & -- Same as SAMPLE "USER1 (000010)," & -- Not available until after configuration "USER2 (000011)," & -- Not available until after configuration "USER3 (011010)," & -- Not available until after configuration "USER4 (011011)," & -- Not available until after configuration "CFG_OUT (000100)," & -- Not available during configuration with another mode. "CFG_IN (000101)," & -- Not available during configuration with another mode. "INTEST (000111)," & "USERCODE (001000)," & "IDCODE (001001)," & "HIGHZ (001010)," & "JPROGRAM (001011)," & -- Not available during configuration with another mode. "JSTART (001100)," & -- Not available during configuration with another mode. "JSHUTDOWN (001101)," & -- Not available during configuration with another mode. "BYPASS (111111)," & "FUSE_UPDATE (111010)," & "FUSE_KEY (111011)," & "FUSE_OPTIONS (111100)," & "FUSE_CNTL (111101)," & "ISC_FUSE_WRITE (110001)," & "ISC_IOIMISR (110010)," & "ISC_ENABLE (010000)," & "ISC_PROGRAM (010001)," & "ISC_PROGRAM_KEY (010010)," & "ISC_ADDRESS_SHIFT (010011)," & "ISC_NOOP (010100)," & "ISC_READ (010101)," & "ISC_DISABLE (010110)," & "ISC_DNA (110000)"; attribute INSTRUCTION_CAPTURE of XC6SLX9_FTG256 : entity is -- Bit 5 is 1 when DONE is released (part of startup sequence) -- Bit 4 is 1 if house-cleaning is complete -- Bit 3 is ISC_Enabled -- Bit 2 is ISC_Done "XXXX01" ; attribute INSTRUCTION_PRIVATE of XC6SLX9_FTG256 : entity is -- If the device is configured, and a USER instruction is implemented -- and not private to the FPGA designer, then it should be removed -- from INSTRUCTION_PRIVATE, and the target register should be defined -- in REGISTER_ACCESS. "USER1," & "USER2," & "USER3," & "USER4," & "CFG_OUT," & "CFG_IN," & "JPROGRAM," & "JSTART," & "JSHUTDOWN," & "FUSE_UPDATE," & "FUSE_KEY," & "FUSE_OPTIONS," & "FUSE_CNTL," & "ISC_FUSE_WRITE," & "ISC_IOIMISR," & "ISC_PROGRAM_KEY," & "ISC_ADDRESS_SHIFT," & "ISC_READ," & "ISC_DNA"; -- Optional Register Description attribute IDCODE_REGISTER of XC6SLX9_FTG256 : entity is "XXXX" & -- version "0100000" & -- family "000000001" & -- array size "00001001001" & -- manufacturer "1"; -- required by 1149.1 attribute USERCODE_REGISTER of XC6SLX9_FTG256 : entity is "XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX"; -- Register Access Description attribute REGISTER_ACCESS of XC6SLX9_FTG256 : entity is -- "[] (USER1)," & -- "[] (USER2)," & -- "[] (USER3)," & -- "[] (USER4)," & "DEVICE_ID (USERCODE,IDCODE)," & "DATAREG[57] (ISC_DNA)," & "BYPASS (BYPASS,HIGHZ,JPROGRAM,JSTART,JSHUTDOWN)," & "ISC_PDATA[16] (ISC_PROGRAM),"& "ISC_DEFAULT[5] (ISC_NOOP)," & "ISC_CONFIG[5] (ISC_ENABLE,ISC_DISABLE)," & "BOUNDARY (SAMPLE,PRELOAD,EXTEST,INTEST)"; -- Boundary-Scan Register Description attribute BOUNDARY_LENGTH of XC6SLX9_FTG256 : entity is 612; attribute BOUNDARY_REGISTER of XC6SLX9_FTG256 : entity is -- cellnum (type, port, function, safe[, ccell, disval, disrslt]) " 0 (BC_2, *, controlr, 1)," & -- TDO " 1 (BC_2, IO_D12, output3, X, 0, 1, Z)," & -- PAD44 " 2 (BC_2, IO_D12, input, X)," & -- PAD44 " 3 (BC_2, *, controlr, 1)," & " 4 (BC_2, IO_D11, output3, X, 3, 1, Z)," & -- PAD43 " 5 (BC_2, IO_D11, input, X)," & -- PAD43 " 6 (BC_2, *, controlr, 1)," & " 7 (BC_2, IO_A14, output3, X, 6, 1, Z)," & -- PAD42 " 8 (BC_2, IO_A14, input, X)," & -- PAD42 " 9 (BC_2, *, controlr, 1)," & " 10 (BC_2, IO_B14, output3, X, 9, 1, Z)," & -- PAD41 " 11 (BC_2, IO_B14, input, X)," & -- PAD41 " 12 (BC_2, *, controlr, 1)," & " 13 (BC_2, IO_E11, output3, X, 12, 1, Z)," & -- PAD40 " 14 (BC_2, IO_E11, input, X)," & -- PAD40 " 15 (BC_2, *, controlr, 1)," & " 16 (BC_2, IO_F10, output3, X, 15, 1, Z)," & -- PAD39 " 17 (BC_2, IO_F10, input, X)," & -- PAD39 " 18 (BC_2, *, controlr, 1)," & " 19 (BC_2, IO_A13, output3, X, 18, 1, Z)," & -- PAD38 " 20 (BC_2, IO_A13, input, X)," & -- PAD38 " 21 (BC_2, *, controlr, 1)," & " 22 (BC_2, IO_C13, output3, X, 21, 1, Z)," & -- PAD37 " 23 (BC_2, IO_C13, input, X)," & -- PAD37 " 24 (BC_2, *, controlr, 1)," & " 25 (BC_2, IO_A12, output3, X, 24, 1, Z)," & -- PAD36 " 26 (BC_2, IO_A12, input, X)," & -- PAD36 " 27 (BC_2, *, controlr, 1)," & " 28 (BC_2, IO_B12, output3, X, 27, 1, Z)," & -- PAD35 " 29 (BC_2, IO_B12, input, X)," & -- PAD35 " 30 (BC_2, *, controlr, 1)," & " 31 (BC_2, IO_D9, output3, X, 30, 1, Z)," & -- PAD34 " 32 (BC_2, IO_D9, input, X)," & -- PAD34 " 33 (BC_2, *, controlr, 1)," & " 34 (BC_2, IO_F9, output3, X, 33, 1, Z)," & -- PAD33 " 35 (BC_2, IO_F9, input, X)," & -- PAD33 " 36 (BC_2, *, controlr, 1)," & " 37 (BC_2, IO_A11, output3, X, 36, 1, Z)," & -- PAD32 " 38 (BC_2, IO_A11, input, X)," & -- PAD32 " 39 (BC_2, *, controlr, 1)," & " 40 (BC_2, IO_C11, output3, X, 39, 1, Z)," & -- PAD31 " 41 (BC_2, IO_C11, input, X)," & -- PAD31 " 42 (BC_2, *, controlr, 1)," & " 43 (BC_2, IO_C8, output3, X, 42, 1, Z)," & -- PAD30 " 44 (BC_2, IO_C8, input, X)," & -- PAD30 " 45 (BC_2, *, controlr, 1)," & " 46 (BC_2, IO_D8, output3, X, 45, 1, Z)," & -- PAD29 " 47 (BC_2, IO_D8, input, X)," & -- PAD29 " 48 (BC_2, *, controlr, 1)," & " 49 (BC_2, IO_C10, output3, X, 48, 1, Z)," & -- PAD28 " 50 (BC_2, IO_C10, input, X)," & -- PAD28 " 51 (BC_2, *, controlr, 1)," & " 52 (BC_2, IO_E10, output3, X, 51, 1, Z)," & -- PAD27 " 53 (BC_2, IO_E10, input, X)," & -- PAD27 " 54 (BC_2, *, controlr, 1)," & " 55 (BC_2, IO_E8, output3, X, 54, 1, Z)," & -- PAD26 " 56 (BC_2, IO_E8, input, X)," & -- PAD26 " 57 (BC_2, *, controlr, 1)," & " 58 (BC_2, IO_E7, output3, X, 57, 1, Z)," & -- PAD25 " 59 (BC_2, IO_E7, input, X)," & -- PAD25 " 60 (BC_2, *, controlr, 1)," & " 61 (BC_2, IO_A10, output3, X, 60, 1, Z)," & -- PAD24 " 62 (BC_2, IO_A10, input, X)," & -- PAD24 " 63 (BC_2, *, controlr, 1)," & " 64 (BC_2, IO_B10, output3, X, 63, 1, Z)," & -- PAD23 " 65 (BC_2, IO_B10, input, X)," & -- PAD23 " 66 (BC_2, *, controlr, 1)," & " 67 (BC_2, IO_A9, output3, X, 66, 1, Z)," & -- PAD22 " 68 (BC_2, IO_A9, input, X)," & -- PAD22 " 69 (BC_2, *, controlr, 1)," & " 70 (BC_2, IO_C9, output3, X, 69, 1, Z)," & -- PAD21 " 71 (BC_2, IO_C9, input, X)," & -- PAD21 " 72 (BC_2, *, controlr, 1)," & " 73 (BC_2, IO_A8, output3, X, 72, 1, Z)," & -- PAD20 " 74 (BC_2, IO_A8, input, X)," & -- PAD20 " 75 (BC_2, *, controlr, 1)," & " 76 (BC_2, IO_B8, output3, X, 75, 1, Z)," & -- PAD19 " 77 (BC_2, IO_B8, input, X)," & -- PAD19 " 78 (BC_2, *, internal, 1)," & -- PAD18.T " 79 (BC_2, *, internal, X)," & -- PAD18.O " 80 (BC_2, *, internal, X)," & -- PAD18.I " 81 (BC_2, *, internal, 1)," & -- PAD17.T " 82 (BC_2, *, internal, X)," & -- PAD17.O " 83 (BC_2, *, internal, X)," & -- PAD17.I " 84 (BC_2, *, internal, 1)," & -- PAD16.T " 85 (BC_2, *, internal, X)," & -- PAD16.O " 86 (BC_2, *, internal, X)," & -- PAD16.I " 87 (BC_2, *, internal, 1)," & -- PAD15.T " 88 (BC_2, *, internal, X)," & -- PAD15.O " 89 (BC_2, *, internal, X)," & -- PAD15.I " 90 (BC_2, *, controlr, 1)," & " 91 (BC_2, IO_C6, output3, X, 90, 1, Z)," & -- PAD14 " 92 (BC_2, IO_C6, input, X)," & -- PAD14 " 93 (BC_2, *, controlr, 1)," & " 94 (BC_2, IO_D6, output3, X, 93, 1, Z)," & -- PAD13 " 95 (BC_2, IO_D6, input, X)," & -- PAD13 " 96 (BC_2, *, controlr, 1)," & " 97 (BC_2, IO_A7, output3, X, 96, 1, Z)," & -- PAD12 " 98 (BC_2, IO_A7, input, X)," & -- PAD12 " 99 (BC_2, *, controlr, 1)," & " 100 (BC_2, IO_C7, output3, X, 99, 1, Z)," & -- PAD11 " 101 (BC_2, IO_C7, input, X)," & -- PAD11 " 102 (BC_2, *, controlr, 1)," & " 103 (BC_2, IO_E6, output3, X, 102, 1, Z)," & -- PAD10 " 104 (BC_2, IO_E6, input, X)," & -- PAD10 " 105 (BC_2, *, controlr, 1)," & " 106 (BC_2, IO_F7, output3, X, 105, 1, Z)," & -- PAD9 " 107 (BC_2, IO_F7, input, X)," & -- PAD9 " 108 (BC_2, *, controlr, 1)," & " 109 (BC_2, IO_A6, output3, X, 108, 1, Z)," & -- PAD8 " 110 (BC_2, IO_A6, input, X)," & -- PAD8 " 111 (BC_2, *, controlr, 1)," & " 112 (BC_2, IO_B6, output3, X, 111, 1, Z)," & -- PAD7 " 113 (BC_2, IO_B6, input, X)," & -- PAD7 " 114 (BC_2, *, controlr, 1)," & " 115 (BC_2, IO_C5, output3, X, 114, 1, Z)," & -- PAD6 " 116 (BC_2, IO_C5, input, X)," & -- PAD6 " 117 (BC_2, *, controlr, 1)," & " 118 (BC_2, IO_D5, output3, X, 117, 1, Z)," & -- PAD5 " 119 (BC_2, IO_D5, input, X)," & -- PAD5 " 120 (BC_2, *, controlr, 1)," & " 121 (BC_2, IO_A5, output3, X, 120, 1, Z)," & -- PAD4 " 122 (BC_2, IO_A5, input, X)," & -- PAD4 " 123 (BC_2, *, controlr, 1)," & " 124 (BC_2, IO_B5, output3, X, 123, 1, Z)," & -- PAD3 " 125 (BC_2, IO_B5, input, X)," & -- PAD3 " 126 (BC_2, *, controlr, 1)," & " 127 (BC_2, IO_A4, output3, X, 126, 1, Z)," & -- PAD2 " 128 (BC_2, IO_A4, input, X)," & -- PAD2 " 129 (BC_2, *, internal, 1)," & -- HSWAPEN.T " 130 (BC_2, *, internal, 1)," & -- HSWAPEN.O " 131 (BC_2, HSWAPEN, input, X)," & -- PAD1 " 132 (BC_2, *, controlr, 1)," & " 133 (BC_2, IO_A3, output3, X, 132, 1, Z)," & -- PAD200 " 134 (BC_2, IO_A3, input, X)," & -- PAD200 " 135 (BC_2, *, controlr, 1)," & " 136 (BC_2, IO_B3, output3, X, 135, 1, Z)," & -- PAD199 " 137 (BC_2, IO_B3, input, X)," & -- PAD199 " 138 (BC_2, *, controlr, 1)," & " 139 (BC_2, IO_F5, output3, X, 138, 1, Z)," & -- PAD198 " 140 (BC_2, IO_F5, input, X)," & -- PAD198 " 141 (BC_2, *, controlr, 1)," & " 142 (BC_2, IO_F6, output3, X, 141, 1, Z)," & -- PAD197 " 143 (BC_2, IO_F6, input, X)," & -- PAD197 " 144 (BC_2, *, controlr, 1)," & " 145 (BC_2, IO_E3, output3, X, 144, 1, Z)," & -- PAD196 " 146 (BC_2, IO_E3, input, X)," & -- PAD196 " 147 (BC_2, *, controlr, 1)," & " 148 (BC_2, IO_E4, output3, X, 147, 1, Z)," & -- PAD195 " 149 (BC_2, IO_E4, input, X)," & -- PAD195 " 150 (BC_2, *, controlr, 1)," & " 151 (BC_2, IO_F3, output3, X, 150, 1, Z)," & -- PAD194 " 152 (BC_2, IO_F3, input, X)," & -- PAD194 " 153 (BC_2, *, controlr, 1)," & " 154 (BC_2, IO_F4, output3, X, 153, 1, Z)," & -- PAD193 " 155 (BC_2, IO_F4, input, X)," & -- PAD193 " 156 (BC_2, *, controlr, 1)," & " 157 (BC_2, IO_A2, output3, X, 156, 1, Z)," & -- PAD192 " 158 (BC_2, IO_A2, input, X)," & -- PAD192 " 159 (BC_2, *, controlr, 1)," & " 160 (BC_2, IO_B2, output3, X, 159, 1, Z)," & -- PAD191 " 161 (BC_2, IO_B2, input, X)," & -- PAD191 " 162 (BC_2, *, controlr, 1)," & " 163 (BC_2, IO_G5, output3, X, 162, 1, Z)," & -- PAD190 " 164 (BC_2, IO_G5, input, X)," & -- PAD190 " 165 (BC_2, *, controlr, 1)," & " 166 (BC_2, IO_G6, output3, X, 165, 1, Z)," & -- PAD189 " 167 (BC_2, IO_G6, input, X)," & -- PAD189 " 168 (BC_2, *, controlr, 1)," & " 169 (BC_2, IO_B1, output3, X, 168, 1, Z)," & -- PAD188 " 170 (BC_2, IO_B1, input, X)," & -- PAD188 " 171 (BC_2, *, controlr, 1)," & " 172 (BC_2, IO_C1, output3, X, 171, 1, Z)," & -- PAD187 " 173 (BC_2, IO_C1, input, X)," & -- PAD187 " 174 (BC_2, *, controlr, 1)," & " 175 (BC_2, IO_D1, output3, X, 174, 1, Z)," & -- PAD186 " 176 (BC_2, IO_D1, input, X)," & -- PAD186 " 177 (BC_2, *, controlr, 1)," & " 178 (BC_2, IO_D3, output3, X, 177, 1, Z)," & -- PAD185 " 179 (BC_2, IO_D3, input, X)," & -- PAD185 " 180 (BC_2, *, controlr, 1)," & " 181 (BC_2, IO_C2, output3, X, 180, 1, Z)," & -- PAD184 " 182 (BC_2, IO_C2, input, X)," & -- PAD184 " 183 (BC_2, *, controlr, 1)," & " 184 (BC_2, IO_C3, output3, X, 183, 1, Z)," & -- PAD183 " 185 (BC_2, IO_C3, input, X)," & -- PAD183 " 186 (BC_2, *, controlr, 1)," & " 187 (BC_2, IO_K6, output3, X, 186, 1, Z)," & -- PAD182 " 188 (BC_2, IO_K6, input, X)," & -- PAD182 " 189 (BC_2, *, controlr, 1)," & " 190 (BC_2, IO_K5, output3, X, 189, 1, Z)," & -- PAD181 " 191 (BC_2, IO_K5, input, X)," & -- PAD181 " 192 (BC_2, *, controlr, 1)," & " 193 (BC_2, IO_E1, output3, X, 192, 1, Z)," & -- PAD180 " 194 (BC_2, IO_E1, input, X)," & -- PAD180 " 195 (BC_2, *, controlr, 1)," & " 196 (BC_2, IO_E2, output3, X, 195, 1, Z)," & -- PAD179 " 197 (BC_2, IO_E2, input, X)," & -- PAD179 " 198 (BC_2, *, controlr, 1)," & " 199 (BC_2, IO_L5, output3, X, 198, 1, Z)," & -- PAD178 " 200 (BC_2, IO_L5, input, X)," & -- PAD178 " 201 (BC_2, *, controlr, 1)," & " 202 (BC_2, IO_L4, output3, X, 201, 1, Z)," & -- PAD177 " 203 (BC_2, IO_L4, input, X)," & -- PAD177 " 204 (BC_2, *, controlr, 1)," & " 205 (BC_2, IO_H3, output3, X, 204, 1, Z)," & -- PAD176 " 206 (BC_2, IO_H3, input, X)," & -- PAD176 " 207 (BC_2, *, controlr, 1)," & " 208 (BC_2, IO_H4, output3, X, 207, 1, Z)," & -- PAD175 " 209 (BC_2, IO_H4, input, X)," & -- PAD175 " 210 (BC_2, *, controlr, 1)," & " 211 (BC_2, IO_H5, output3, X, 210, 1, Z)," & -- PAD174 " 212 (BC_2, IO_H5, input, X)," & -- PAD174 " 213 (BC_2, *, controlr, 1)," & " 214 (BC_2, IO_J6, output3, X, 213, 1, Z)," & -- PAD173 " 215 (BC_2, IO_J6, input, X)," & -- PAD173 " 216 (BC_2, *, controlr, 1)," & " 217 (BC_2, IO_J4, output3, X, 216, 1, Z)," & -- PAD172 " 218 (BC_2, IO_J4, input, X)," & -- PAD172 " 219 (BC_2, *, controlr, 1)," & " 220 (BC_2, IO_K3, output3, X, 219, 1, Z)," & -- PAD171 " 221 (BC_2, IO_K3, input, X)," & -- PAD171 " 222 (BC_2, *, controlr, 1)," & " 223 (BC_2, IO_F1, output3, X, 222, 1, Z)," & -- PAD170 " 224 (BC_2, IO_F1, input, X)," & -- PAD170 " 225 (BC_2, *, controlr, 1)," & " 226 (BC_2, IO_F2, output3, X, 225, 1, Z)," & -- PAD169 " 227 (BC_2, IO_F2, input, X)," & -- PAD169 " 228 (BC_2, *, controlr, 1)," & " 229 (BC_2, IO_G1, output3, X, 228, 1, Z)," & -- PAD168 " 230 (BC_2, IO_G1, input, X)," & -- PAD168 " 231 (BC_2, *, controlr, 1)," & " 232 (BC_2, IO_G3, output3, X, 231, 1, Z)," & -- PAD167 " 233 (BC_2, IO_G3, input, X)," & -- PAD167 " 234 (BC_2, *, controlr, 1)," & " 235 (BC_2, IO_H1, output3, X, 234, 1, Z)," & -- PAD166 " 236 (BC_2, IO_H1, input, X)," & -- PAD166 " 237 (BC_2, *, controlr, 1)," & " 238 (BC_2, IO_H2, output3, X, 237, 1, Z)," & -- PAD165 " 239 (BC_2, IO_H2, input, X)," & -- PAD165 " 240 (BC_2, *, controlr, 1)," & " 241 (BC_2, IO_J1, output3, X, 240, 1, Z)," & -- PAD164 " 242 (BC_2, IO_J1, input, X)," & -- PAD164 " 243 (BC_2, *, controlr, 1)," & " 244 (BC_2, IO_J3, output3, X, 243, 1, Z)," & -- PAD163 " 245 (BC_2, IO_J3, input, X)," & -- PAD163 " 246 (BC_2, *, controlr, 1)," & " 247 (BC_2, IO_K1, output3, X, 246, 1, Z)," & -- PAD162 " 248 (BC_2, IO_K1, input, X)," & -- PAD162 " 249 (BC_2, *, controlr, 1)," & " 250 (BC_2, IO_K2, output3, X, 249, 1, Z)," & -- PAD161 " 251 (BC_2, IO_K2, input, X)," & -- PAD161 " 252 (BC_2, *, controlr, 1)," & " 253 (BC_2, IO_L1, output3, X, 252, 1, Z)," & -- PAD160 " 254 (BC_2, IO_L1, input, X)," & -- PAD160 " 255 (BC_2, *, controlr, 1)," & " 256 (BC_2, IO_L3, output3, X, 255, 1, Z)," & -- PAD159 " 257 (BC_2, IO_L3, input, X)," & -- PAD159 " 258 (BC_2, *, controlr, 1)," & " 259 (BC_2, IO_M1, output3, X, 258, 1, Z)," & -- PAD158 " 260 (BC_2, IO_M1, input, X)," & -- PAD158 " 261 (BC_2, *, controlr, 1)," & " 262 (BC_2, IO_M2, output3, X, 261, 1, Z)," & -- PAD157 " 263 (BC_2, IO_M2, input, X)," & -- PAD157 " 264 (BC_2, *, controlr, 1)," & " 265 (BC_2, IO_N1, output3, X, 264, 1, Z)," & -- PAD156 " 266 (BC_2, IO_N1, input, X)," & -- PAD156 " 267 (BC_2, *, controlr, 1)," & " 268 (BC_2, IO_N3, output3, X, 267, 1, Z)," & -- PAD155 " 269 (BC_2, IO_N3, input, X)," & -- PAD155 " 270 (BC_2, *, controlr, 1)," & " 271 (BC_2, IO_P1, output3, X, 270, 1, Z)," & -- PAD154 " 272 (BC_2, IO_P1, input, X)," & -- PAD154 " 273 (BC_2, *, controlr, 1)," & " 274 (BC_2, IO_P2, output3, X, 273, 1, Z)," & -- PAD153 " 275 (BC_2, IO_P2, input, X)," & -- PAD153 " 276 (BC_2, *, controlr, 1)," & " 277 (BC_2, IO_R1, output3, X, 276, 1, Z)," & -- PAD152 " 278 (BC_2, IO_R1, input, X)," & -- PAD152 " 279 (BC_2, *, controlr, 1)," & " 280 (BC_2, IO_R2, output3, X, 279, 1, Z)," & -- PAD151 " 281 (BC_2, IO_R2, input, X)," & -- PAD151 " 282 (BC_2, *, internal, 1)," & -- PAD150.T " 283 (BC_2, *, internal, X)," & -- PAD150.O " 284 (BC_2, *, internal, X)," & -- PAD150.I " 285 (BC_2, *, internal, 1)," & -- PAD149.T " 286 (BC_2, *, internal, X)," & -- PAD149.O " 287 (BC_2, *, internal, X)," & -- PAD149.I " 288 (BC_2, *, controlr, 1)," & " 289 (BC_2, IO_N4, output3, X, 288, 1, Z)," & -- PAD148 " 290 (BC_2, IO_N4, input, X)," & -- PAD148 " 291 (BC_2, *, controlr, 1)," & " 292 (BC_2, IO_M5, output3, X, 291, 1, Z)," & -- PAD147 " 293 (BC_2, IO_M5, input, X)," & -- PAD147 " 294 (BC_2, *, controlr, 1)," & " 295 (BC_2, IO_M3, output3, X, 294, 1, Z)," & -- PAD146 " 296 (BC_2, IO_M3, input, X)," & -- PAD146 " 297 (BC_2, *, controlr, 1)," & " 298 (BC_2, IO_M4, output3, X, 297, 1, Z)," & -- PAD145 " 299 (BC_2, IO_M4, input, X)," & -- PAD145 " 300 (BC_2, *, internal, 1)," & -- PROGRAM_B.T " 301 (BC_2, *, internal, 1)," & -- PROGRAM_B.O " 302 (BC_2, *, internal, 1)," & -- PROGRAM_B.I " 303 (BC_2, *, controlr, 1)," & " 304 (BC_2, IO_T3, output3, X, 303, 1, Z)," & -- PAD144 " 305 (BC_2, IO_T3, input, X)," & -- PAD144 " 306 (BC_2, *, controlr, 1)," & " 307 (BC_2, IO_R3, output3, X, 306, 1, PULL1)," & -- PAD143 " 308 (BC_2, IO_R3, input, X)," & -- PAD143 " 309 (BC_2, *, controlr, 1)," & " 310 (BC_2, IO_N6, output3, X, 309, 1, Z)," & -- PAD142 " 311 (BC_2, IO_N6, input, X)," & -- PAD142 " 312 (BC_2, *, controlr, 1)," & " 313 (BC_2, IO_M6, output3, X, 312, 1, Z)," & -- PAD141 " 314 (BC_2, IO_M6, input, X)," & -- PAD141 " 315 (BC_2, *, controlr, 1)," & " 316 (BC_2, IO_T4, output3, X, 315, 1, Z)," & -- PAD140 " 317 (BC_2, IO_T4, input, X)," & -- PAD140 " 318 (BC_2, *, controlr, 1)," & " 319 (BC_2, IO_P4, output3, X, 318, 1, Z)," & -- PAD139 " 320 (BC_2, IO_P4, input, X)," & -- PAD139 " 321 (BC_2, *, controlr, 1)," & " 322 (BC_2, IO_L7, output3, X, 321, 1, Z)," & -- PAD138 " 323 (BC_2, IO_L7, input, X)," & -- PAD138 " 324 (BC_2, *, controlr, 1)," & " 325 (BC_2, IO_L8, output3, X, 324, 1, Z)," & -- PAD137 " 326 (BC_2, IO_L8, input, X)," & -- PAD137 " 327 (BC_2, *, controlr, 1)," & " 328 (BC_2, IO_P5, output3, X, 327, 1, Z)," & -- PAD136 " 329 (BC_2, IO_P5, input, X)," & -- PAD136 " 330 (BC_2, *, controlr, 1)," & " 331 (BC_2, IO_N5, output3, X, 330, 1, Z)," & -- PAD135 " 332 (BC_2, IO_N5, input, X)," & -- PAD135 " 333 (BC_2, *, controlr, 1)," & " 334 (BC_2, IO_T5, output3, X, 333, 1, Z)," & -- PAD134 " 335 (BC_2, IO_T5, input, X)," & -- PAD134 " 336 (BC_2, *, controlr, 1)," & " 337 (BC_2, IO_R5, output3, X, 336, 1, Z)," & -- PAD133 " 338 (BC_2, IO_R5, input, X)," & -- PAD133 " 339 (BC_2, *, controlr, 1)," & " 340 (BC_2, IO_T6, output3, X, 339, 1, Z)," & -- PAD132 " 341 (BC_2, IO_T6, input, X)," & -- PAD132 " 342 (BC_2, *, controlr, 1)," & " 343 (BC_2, IO_P6, output3, X, 342, 1, Z)," & -- PAD131 " 344 (BC_2, IO_P6, input, X)," & -- PAD131 " 345 (BC_2, *, internal, 1)," & -- PAD130.T " 346 (BC_2, *, internal, X)," & -- PAD130.O " 347 (BC_2, *, internal, X)," & -- PAD130.I " 348 (BC_2, *, internal, 1)," & -- PAD129.T " 349 (BC_2, *, internal, X)," & -- PAD129.O " 350 (BC_2, *, internal, X)," & -- PAD129.I " 351 (BC_2, *, internal, 1)," & -- PAD128.T " 352 (BC_2, *, internal, X)," & -- PAD128.O " 353 (BC_2, *, internal, X)," & -- PAD128.I " 354 (BC_2, *, internal, 1)," & -- PAD127.T " 355 (BC_2, *, internal, X)," & -- PAD127.O " 356 (BC_2, *, internal, X)," & -- PAD127.I " 357 (BC_2, *, internal, 1)," & -- PAD126.T " 358 (BC_2, *, internal, X)," & -- PAD126.O " 359 (BC_2, *, internal, X)," & -- PAD126.I " 360 (BC_2, *, internal, 1)," & -- PAD125.T " 361 (BC_2, *, internal, X)," & -- PAD125.O " 362 (BC_2, *, internal, X)," & -- PAD125.I " 363 (BC_2, *, controlr, 1)," & " 364 (BC_2, IO_T7, output3, X, 363, 1, Z)," & -- PAD124 " 365 (BC_2, IO_T7, input, X)," & -- PAD124 " 366 (BC_2, *, controlr, 1)," & " 367 (BC_2, IO_R7, output3, X, 366, 1, Z)," & -- PAD123 " 368 (BC_2, IO_R7, input, X)," & -- PAD123 " 369 (BC_2, *, controlr, 1)," & " 370 (BC_2, IO_M7, output3, X, 369, 1, Z)," & -- PAD122 " 371 (BC_2, IO_M7, input, X)," & -- PAD122 " 372 (BC_2, *, controlr, 1)," & " 373 (BC_2, IO_P7, output3, X, 372, 1, Z)," & -- PAD121 " 374 (BC_2, IO_P7, input, X)," & -- PAD121 " 375 (BC_2, *, controlr, 1)," & " 376 (BC_2, IO_T8, output3, X, 375, 1, Z)," & -- PAD120 " 377 (BC_2, IO_T8, input, X)," & -- PAD120 " 378 (BC_2, *, controlr, 1)," & " 379 (BC_2, IO_P8, output3, X, 378, 1, Z)," & -- PAD119 " 380 (BC_2, IO_P8, input, X)," & -- PAD119 " 381 (BC_2, *, controlr, 1)," & " 382 (BC_2, IO_N8, output3, X, 381, 1, Z)," & -- PAD118 " 383 (BC_2, IO_N8, input, X)," & -- PAD118 " 384 (BC_2, *, controlr, 1)," & " 385 (BC_2, IO_M9, output3, X, 384, 1, Z)," & -- PAD117 " 386 (BC_2, IO_M9, input, X)," & -- PAD117 " 387 (BC_2, *, controlr, 1)," & " 388 (BC_2, IO_M10, output3, X, 387, 1, Z)," & -- PAD116 " 389 (BC_2, IO_M10, input, X)," & -- PAD116 " 390 (BC_2, *, controlr, 1)," & " 391 (BC_2, IO_L10, output3, X, 390, 1, Z)," & -- PAD115 " 392 (BC_2, IO_L10, input, X)," & -- PAD115 " 393 (BC_2, *, controlr, 1)," & " 394 (BC_2, IO_T9, output3, X, 393, 1, Z)," & -- PAD114 " 395 (BC_2, IO_T9, input, X)," & -- PAD114 " 396 (BC_2, *, controlr, 1)," & " 397 (BC_2, IO_R9, output3, X, 396, 1, Z)," & -- PAD113 " 398 (BC_2, IO_R9, input, X)," & -- PAD113 " 399 (BC_2, *, controlr, 1)," & " 400 (BC_2, IO_P9, output3, X, 399, 1, Z)," & -- PAD112 " 401 (BC_2, IO_P9, input, X)," & -- PAD112 " 402 (BC_2, *, controlr, 1)," & " 403 (BC_2, IO_N9, output3, X, 402, 1, Z)," & -- PAD111 " 404 (BC_2, IO_N9, input, X)," & -- PAD111 " 405 (BC_2, *, controlr, 1)," & " 406 (BC_2, IO_P11, output3, X, 405, 1, Z)," & -- PAD110 " 407 (BC_2, IO_P11, input, X)," & -- PAD110 " 408 (BC_2, *, controlr, 1)," & " 409 (BC_2, IO_N11, output3, X, 408, 1, PULL1)," & -- PAD109 " 410 (BC_2, IO_N11, input, X)," & -- PAD109 " 411 (BC_2, *, controlr, 1)," & " 412 (BC_2, IO_P12, output3, X, 411, 1, Z)," & -- PAD108 " 413 (BC_2, IO_P12, input, X)," & -- PAD108 " 414 (BC_2, *, controlr, 1)," & " 415 (BC_2, IO_N12, output3, X, 414, 1, Z)," & -- PAD107 " 416 (BC_2, IO_N12, input, X)," & -- PAD107 " 417 (BC_2, *, controlr, 1)," & " 418 (BC_2, IO_T10, output3, X, 417, 1, Z)," & -- PAD106 " 419 (BC_2, IO_T10, input, X)," & -- PAD106 " 420 (BC_2, *, controlr, 1)," & " 421 (BC_2, IO_P10, output3, X, 420, 1, Z)," & -- PAD105 " 422 (BC_2, IO_P10, input, X)," & -- PAD105 " 423 (BC_2, *, controlr, 1)," & " 424 (BC_2, IO_M11, output3, X, 423, 1, Z)," & -- PAD104 " 425 (BC_2, IO_M11, input, X)," & -- PAD104 " 426 (BC_2, *, controlr, 1)," & " 427 (BC_2, IO_M12, output3, X, 426, 1, Z)," & -- PAD103 " 428 (BC_2, IO_M12, input, X)," & -- PAD103 " 429 (BC_2, *, controlr, 1)," & " 430 (BC_2, IO_T11, output3, X, 429, 1, PULL1)," & -- PAD102 " 431 (BC_2, IO_T11, input, X)," & -- PAD102 " 432 (BC_2, *, controlr, 1)," & " 433 (BC_2, IO_R11, output3, X, 432, 1, Z)," & -- PAD101 " 434 (BC_2, IO_R11, input, X)," & -- PAD101 " 435 (BC_2, *, controlr, 1)," & " 436 (BC_2, DONE, output3, X, 435, 1, PULL1)," & -- DONE_2 " 437 (BC_2, DONE, input, X)," & -- DONE_2 " 438 (BC_2, *, internal, 1)," & -- CMPCS_B.T " 439 (BC_2, *, internal, 1)," & -- CMPCS_B.O " 440 (BC_2, CMPCS_B, input, X)," & -- CMPCS_B_2 " 441 (BC_2, *, internal, 1)," & -- SUSPEND.T " 442 (BC_2, *, internal, 1)," & -- SUSPEND.O " 443 (BC_2, SUSPEND, input, X)," & " 444 (BC_2, *, controlr, 1)," & " 445 (BC_2, IO_M14, output3, X, 444, 1, Z)," & -- PAD100 " 446 (BC_2, IO_M14, input, X)," & -- PAD100 " 447 (BC_2, *, controlr, 1)," & " 448 (BC_2, IO_M13, output3, X, 447, 1, Z)," & -- PAD99 " 449 (BC_2, IO_M13, input, X)," & -- PAD99 " 450 (BC_2, *, internal, 1)," & -- PAD98.T " 451 (BC_2, *, internal, X)," & -- PAD98.O " 452 (BC_2, *, internal, X)," & -- PAD98.I " 453 (BC_2, *, internal, 1)," & -- PAD97.T " 454 (BC_2, *, internal, X)," & -- PAD97.O " 455 (BC_2, *, internal, X)," & -- PAD97.I " 456 (BC_2, *, controlr, 1)," & " 457 (BC_2, IO_L13, output3, X, 456, 1, Z)," & -- PAD96 " 458 (BC_2, IO_L13, input, X)," & -- PAD96 " 459 (BC_2, *, controlr, 1)," & " 460 (BC_2, IO_L12, output3, X, 459, 1, Z)," & -- PAD95 " 461 (BC_2, IO_L12, input, X)," & -- PAD95 " 462 (BC_2, *, controlr, 1)," & " 463 (BC_2, IO_T12, output3, X, 462, 1, Z)," & -- PAD94 " 464 (BC_2, IO_T12, input, X)," & -- PAD94 " 465 (BC_2, *, controlr, 1)," & " 466 (BC_2, IO_R12, output3, X, 465, 1, Z)," & -- PAD93 " 467 (BC_2, IO_R12, input, X)," & -- PAD93 " 468 (BC_2, *, controlr, 1)," & " 469 (BC_2, IO_T13, output3, X, 468, 1, Z)," & -- PAD92 " 470 (BC_2, IO_T13, input, X)," & -- PAD92 " 471 (BC_2, *, controlr, 1)," & " 472 (BC_2, IO_T14, output3, X, 471, 1, Z)," & -- PAD91 " 473 (BC_2, IO_T14, input, X)," & -- PAD91 " 474 (BC_2, *, controlr, 1)," & " 475 (BC_2, IO_T15, output3, X, 474, 1, Z)," & -- PAD90 " 476 (BC_2, IO_T15, input, X)," & -- PAD90 " 477 (BC_2, *, controlr, 1)," & " 478 (BC_2, IO_R14, output3, X, 477, 1, Z)," & -- PAD89 " 479 (BC_2, IO_R14, input, X)," & -- PAD89 " 480 (BC_2, *, controlr, 1)," & " 481 (BC_2, IO_R16, output3, X, 480, 1, Z)," & -- PAD88 " 482 (BC_2, IO_R16, input, X)," & -- PAD88 " 483 (BC_2, *, controlr, 1)," & " 484 (BC_2, IO_R15, output3, X, 483, 1, Z)," & -- PAD87 " 485 (BC_2, IO_R15, input, X)," & -- PAD87 " 486 (BC_2, *, controlr, 1)," & " 487 (BC_2, IO_P16, output3, X, 486, 1, Z)," & -- PAD86 " 488 (BC_2, IO_P16, input, X)," & -- PAD86 " 489 (BC_2, *, controlr, 1)," & " 490 (BC_2, IO_P15, output3, X, 489, 1, Z)," & -- PAD85 " 491 (BC_2, IO_P15, input, X)," & -- PAD85 " 492 (BC_2, *, controlr, 1)," & " 493 (BC_2, IO_L16, output3, X, 492, 1, Z)," & -- PAD84 " 494 (BC_2, IO_L16, input, X)," & -- PAD84 " 495 (BC_2, *, controlr, 1)," & " 496 (BC_2, IO_L14, output3, X, 495, 1, Z)," & -- PAD83 " 497 (BC_2, IO_L14, input, X)," & -- PAD83 " 498 (BC_2, *, controlr, 1)," & " 499 (BC_2, IO_M16, output3, X, 498, 1, Z)," & -- PAD82 " 500 (BC_2, IO_M16, input, X)," & -- PAD82 " 501 (BC_2, *, controlr, 1)," & " 502 (BC_2, IO_M15, output3, X, 501, 1, Z)," & -- PAD81 " 503 (BC_2, IO_M15, input, X)," & -- PAD81 " 504 (BC_2, *, controlr, 1)," & " 505 (BC_2, IO_N16, output3, X, 504, 1, Z)," & -- PAD80 " 506 (BC_2, IO_N16, input, X)," & -- PAD80 " 507 (BC_2, *, controlr, 1)," & " 508 (BC_2, IO_N14, output3, X, 507, 1, Z)," & -- PAD79 " 509 (BC_2, IO_N14, input, X)," & -- PAD79 " 510 (BC_2, *, controlr, 1)," & " 511 (BC_2, IO_K16, output3, X, 510, 1, Z)," & -- PAD78 " 512 (BC_2, IO_K16, input, X)," & -- PAD78 " 513 (BC_2, *, controlr, 1)," & " 514 (BC_2, IO_K15, output3, X, 513, 1, Z)," & -- PAD77 " 515 (BC_2, IO_K15, input, X)," & -- PAD77 " 516 (BC_2, *, controlr, 1)," & " 517 (BC_2, IO_J16, output3, X, 516, 1, Z)," & -- PAD76 " 518 (BC_2, IO_J16, input, X)," & -- PAD76 " 519 (BC_2, *, controlr, 1)," & " 520 (BC_2, IO_J14, output3, X, 519, 1, Z)," & -- PAD75 " 521 (BC_2, IO_J14, input, X)," & -- PAD75 " 522 (BC_2, *, controlr, 1)," & " 523 (BC_2, IO_K11, output3, X, 522, 1, Z)," & -- PAD74 " 524 (BC_2, IO_K11, input, X)," & -- PAD74 " 525 (BC_2, *, controlr, 1)," & " 526 (BC_2, IO_K12, output3, X, 525, 1, Z)," & -- PAD73 " 527 (BC_2, IO_K12, input, X)," & -- PAD73 " 528 (BC_2, *, controlr, 1)," & " 529 (BC_2, IO_K14, output3, X, 528, 1, Z)," & -- PAD72 " 530 (BC_2, IO_K14, input, X)," & -- PAD72 " 531 (BC_2, *, controlr, 1)," & " 532 (BC_2, IO_J13, output3, X, 531, 1, Z)," & -- PAD71 " 533 (BC_2, IO_J13, input, X)," & -- PAD71 " 534 (BC_2, *, controlr, 1)," & " 535 (BC_2, IO_J12, output3, X, 534, 1, Z)," & -- PAD70 " 536 (BC_2, IO_J12, input, X)," & -- PAD70 " 537 (BC_2, *, controlr, 1)," & " 538 (BC_2, IO_J11, output3, X, 537, 1, Z)," & -- PAD69 " 539 (BC_2, IO_J11, input, X)," & -- PAD69 " 540 (BC_2, *, controlr, 1)," & " 541 (BC_2, IO_H14, output3, X, 540, 1, Z)," & -- PAD68 " 542 (BC_2, IO_H14, input, X)," & -- PAD68 " 543 (BC_2, *, controlr, 1)," & " 544 (BC_2, IO_H13, output3, X, 543, 1, Z)," & -- PAD67 " 545 (BC_2, IO_H13, input, X)," & -- PAD67 " 546 (BC_2, *, controlr, 1)," & " 547 (BC_2, IO_H11, output3, X, 546, 1, Z)," & -- PAD66 " 548 (BC_2, IO_H11, input, X)," & -- PAD66 " 549 (BC_2, *, controlr, 1)," & " 550 (BC_2, IO_G12, output3, X, 549, 1, Z)," & -- PAD65 " 551 (BC_2, IO_G12, input, X)," & -- PAD65 " 552 (BC_2, *, controlr, 1)," & " 553 (BC_2, IO_H16, output3, X, 552, 1, Z)," & -- PAD64 " 554 (BC_2, IO_H16, input, X)," & -- PAD64 " 555 (BC_2, *, controlr, 1)," & " 556 (BC_2, IO_H15, output3, X, 555, 1, Z)," & -- PAD63 " 557 (BC_2, IO_H15, input, X)," & -- PAD63 " 558 (BC_2, *, controlr, 1)," & " 559 (BC_2, IO_G16, output3, X, 558, 1, Z)," & -- PAD62 " 560 (BC_2, IO_G16, input, X)," & -- PAD62 " 561 (BC_2, *, controlr, 1)," & " 562 (BC_2, IO_G14, output3, X, 561, 1, Z)," & -- PAD61 " 563 (BC_2, IO_G14, input, X)," & -- PAD61 " 564 (BC_2, *, controlr, 1)," & " 565 (BC_2, IO_F16, output3, X, 564, 1, Z)," & -- PAD60 " 566 (BC_2, IO_F16, input, X)," & -- PAD60 " 567 (BC_2, *, controlr, 1)," & " 568 (BC_2, IO_F15, output3, X, 567, 1, Z)," & -- PAD59 " 569 (BC_2, IO_F15, input, X)," & -- PAD59 " 570 (BC_2, *, controlr, 1)," & " 571 (BC_2, IO_E16, output3, X, 570, 1, Z)," & -- PAD58 " 572 (BC_2, IO_E16, input, X)," & -- PAD58 " 573 (BC_2, *, controlr, 1)," & " 574 (BC_2, IO_E15, output3, X, 573, 1, Z)," & -- PAD57 " 575 (BC_2, IO_E15, input, X)," & -- PAD57 " 576 (BC_2, *, controlr, 1)," & " 577 (BC_2, IO_C16, output3, X, 576, 1, Z)," & -- PAD56 " 578 (BC_2, IO_C16, input, X)," & -- PAD56 " 579 (BC_2, *, controlr, 1)," & " 580 (BC_2, IO_C15, output3, X, 579, 1, Z)," & -- PAD55 " 581 (BC_2, IO_C15, input, X)," & -- PAD55 " 582 (BC_2, *, controlr, 1)," & " 583 (BC_2, IO_F14, output3, X, 582, 1, Z)," & -- PAD54 " 584 (BC_2, IO_F14, input, X)," & -- PAD54 " 585 (BC_2, *, controlr, 1)," & " 586 (BC_2, IO_F13, output3, X, 585, 1, Z)," & -- PAD53 " 587 (BC_2, IO_F13, input, X)," & -- PAD53 " 588 (BC_2, *, controlr, 1)," & " 589 (BC_2, IO_D16, output3, X, 588, 1, Z)," & -- PAD52 " 590 (BC_2, IO_D16, input, X)," & -- PAD52 " 591 (BC_2, *, controlr, 1)," & " 592 (BC_2, IO_D14, output3, X, 591, 1, Z)," & -- PAD51 " 593 (BC_2, IO_D14, input, X)," & -- PAD51 " 594 (BC_2, *, controlr, 1)," & " 595 (BC_2, IO_G11, output3, X, 594, 1, Z)," & -- PAD50 " 596 (BC_2, IO_G11, input, X)," & -- PAD50 " 597 (BC_2, *, controlr, 1)," & " 598 (BC_2, IO_F12, output3, X, 597, 1, Z)," & -- PAD49 " 599 (BC_2, IO_F12, input, X)," & -- PAD49 " 600 (BC_2, *, controlr, 1)," & " 601 (BC_2, IO_B16, output3, X, 600, 1, Z)," & -- PAD48 " 602 (BC_2, IO_B16, input, X)," & -- PAD48 " 603 (BC_2, *, controlr, 1)," & " 604 (BC_2, IO_B15, output3, X, 603, 1, Z)," & -- PAD47 " 605 (BC_2, IO_B15, input, X)," & -- PAD47 " 606 (BC_2, *, controlr, 1)," & " 607 (BC_2, IO_E12, output3, X, 606, 1, Z)," & -- PAD46 " 608 (BC_2, IO_E12, input, X)," & -- PAD46 " 609 (BC_2, *, controlr, 1)," & " 610 (BC_2, IO_E13, output3, X, 609, 1, Z)," & -- PAD45 " 611 (BC_2, IO_E13, input, X)"; -- PAD45 -- Design Warning Section attribute DESIGN_WARNING of XC6SLX9_FTG256 : entity is "This is a preliminary BSDL file which has not been verified." & "When no bitstream is loaded and GTPs are not instantiated," & "the boundary-scan cells associated with GTPs will not" & "capture correct state information. To model the boundary-" & "scan cell behavior correctly post-configuration, use" & "BSDLanno to modify the BSDL file." & "This BSDL file must be modified by the FPGA designer in order to" & "reflect post-configuration behavior (if any)." & "To avoid losing the current configuration, the boundary scan" & "test vectors should keep the PROGRAM_B pin" & "high. If the PROGRAM_B pin goes low by any means," & "the configuration will be cleared." & "PROGRAM_B, HSWAPEN, M0, and M1 can only be captured, not updated." & "The value at the pin is always used by the device." & "The disable result of a 3-stated I/O in this file" & "corresponds to HSWAPEN being high. If HSWAPEN" & "is low, every Z should be changed to PULL1." & "In EXTEST, output and tristate values are not captured in the" & "Capture-DR state - those register cells are unchanged." & "In INTEST, the pin input values are not captured in the" & "Capture-DR state - those register cells are unchanged." & "The output and tristate capture values are not valid until after" & "the device is configured." & "The tristate control value is not captured properly when" & "GTS is activated." & "NOCONNECT pins should not be connected to any supply" & "or GND. They should be left floating."; end XC6SLX9_FTG256;