PCIe Hardware

About PCIe Hardware

PCIe hardware is available in many configurations that support the ScanWorks platform software.

PCIe-410 Hardware Kit with Four-Port Low-Voltage Pod

The PCIe-410 hardware kit is a high throughput, flexible boundary-scan test (BST)/JTAG controller for the ScanWorks® platform for embedded instruments. The PCIe-410 is intended for high-volume manufacturing environments and multi-TAP (test access port) UUTs (unit under test). It applies the test and programming operations created with the ScanWorks BST tool, supporting structural tests such as shorts and opens testing, scan path verification, interconnect tests and memory access tests. With its high-speed test clock (TCK) and parallel programming option, it is also highly recommended for in-system programming.

PCIe 410 Hardware

PCIe-1000 Hardware Kit

The PCIe-1000 hardware kit is a high throughput, flexible JTAG (IEEE 1149.1 and IEEE 1149.6 boundary scan standard) controller and single port pod for the ScanWorks platform for embedded instruments. The PCIe-1000 applies tests generated by three of the test technologies supported by the ScanWorks platform, including boundary-scan test (BST), processor-controlled test (PCT) and FPGA-controlled test (FCT). The test, validation, debug and programming operations supported by ScanWorks cover a wide range of processes, including the following: the BST tool supports structural tests for shorts and opens, scan path verification, interconnect tests, device programming, and memory access tests; the PCT tool supports functional test with structural fault detection and device programming, and the FCT tool supports using an existing functional FPGA as an embedded board tester and for device programming.

PCIe-1000 Hardware